Thursday, October 11, 2018
5 Just-Released Stencils and Masks!
These five brand-new stencils and masks are --
s658
Garden at Nemours
.....6"x 6"
l675
Longwood Florals Mask
.....
9"x 12"
L676
Longwood Florals Stencil
.....
9"x 12"
L677
Winter Berries Mask
.....9"x 12"
L678
Winter Berries Stencil
.....
9"x 12"
Today's post will show samples of art made with each of these new stencils and masks.
l675
Longwood Florals Mask
The artwork above is ready to be framed. Its background is an old encyclopedia page that has a floral design in the upper right. Glued over that is the mask itself, stained with paints after being used in a variety of art projects.
L676
Longwood Florals Stencil
Above is a double-print made with the same stencil. The first print was made with yellow acrylic paint on a yellow-orange background paper. After that dried, I placed the stencil back on the paper, spacing it so that it would be somewhat off-key with the original print. Then I used purple acrylic paint to make the second print.
L678
Winter Berries Stencil
The artwork above was created on an old sheet of paper that had been printed and over-printed several times. I could have used a Gelli Plate to make the topmost print with this new stencil, but instead, I decided to place the stencil onto the paper and go over it using a sponge brayer loaded with heavy-body acrylic paint. The next 2 photos below show my process ....
Above: a sponge brayer is being loaded with heavy-body acrylic paint.
Above: a paint-loaded brayer is being run over a stencil. (The stencil pictured in this example is
Sassy Spray
, a stencil previously released at StencilGirl.)
The art below was created with Golden high flow acrylics on a Fredrix Watercolor stretched canvas. I prefer this type of stretched canvas because it has a smooth surface that picks up even fine details of a mask or a stencil.
L677
Winter Berries Mask
.....9"x 12"
s658
Garden at Nemours
Like an earlier example in this post, my artwork above was created on an old sheet of paper that had been printed and over-printed several times. I could have used a Gelli Plate to make the topmost print with this new stencil, but instead, I decided to place the stencil onto the paper and go over it using a sponge brayer loaded with heavy-body acrylic paint.
Thanks for stopping here today! To scroll thru all my StencilGirl stencils and masks, please start
here
.
‹
›
Home
View web version